5 Tips to Stop Mold Spreading in Your Home

Molds are part of the natural environment. Outdoors, molds play a part in nature, but indoors, mold growth should be avoided. Molds reproduce by means of tiny spores that are invisible to the naked eye. Mold may begin growing indoors when mold spores land on wet surfaces, and this brings risks to your and your family’s health, such as allergens that can cause allergic reactions, irritants, and, in some cases, potentially toxic substances like mycotoxins.

Preventing mold from spreading in your home is fundamental to keeping a safe environment and avoid damage to your furniture and even compromise the structural integrity of your home. The key to prevent mold is simple: Moisture control. And by following the next tips you can accomplish this.

Don’t Blow Air Across Any Surfaces With Visible Or Suspected Mold Growth

Since mold spreads through the air, it is important to avoid blowing air in places or surfaces where mold is confirmed to be growing. These surfaces include carpeting, wallpaper, and ceiling tiles which are common places for moisture buildup and mold growth. At the same time, these materials cannot be cleaned thoroughly enough to remove all mold spores. Therefore, they should be removed from the property and disposed of properly.

Turn Off The HVAC System And Fans

If you suspect your air conditioning (HVAC) system may be contaminated with mold or if there is mold near the intake to the system, do not run the HVAC system. If you know or suspect that it is contaminated with mold – it could spread mold throughout the house.

Many sections of your heating and cooling system may not be accessible for a visible inspection, so the best solution is to get an expert such as Water Mold Inspect & Rebuild to show you any mold they say exists, and although a substance may look like mold, a positive determination of whether it is mold or not can be made only by an expert.

While changing your HVAC System is large and expensive job if you have insulated air ducts and the insulation gets wet or moldy it cannot be effectively cleaned and should be removed and replaced.

Look for Water Damage

Since mold is often found where leaks, flooding, and other types of water damage occur, look for those places and identify signs that prove the growth of mold such as black areas. The most common places to search for are:

Clean up small mold problems and fix moisture problems before they become large problems. Depending on the size of the area involved with water damage and the resources available, professional assistance may be needed to dry an area quickly and thoroughly. By following the Mold Remediation in Schools and Commercial Buildings Guide: Chapter 4 provided by EPA, you can learn what actions you can implement after water damage to prevent the growth of mold.

Keep Indoor Humidity Low

Keep indoor humidity below 60 percent relative humidity (ideally between 30 and 50 percent). Relative humidity can be measured with a moisture meter, a small instrument available at many stores. A way to accomplish this is to use a dehumidifier, which drastically reduces humidity levels. Another action you can implement is to vent outside appliances that produce moisture as much as possible, such as clothes dryers, stoves, and kerosene heaters.

Contact Water Mold Inspect For Mold Remediation Services

Accurate mold assessments are essential for effective remediation and maintaining a healthy home environment. Water Mold Inspect & Rebuild offers thorough inspections that identify the source and extent of mold growth. With extensive experience and a commitment to quality service, we can ensure your home is safe and secure from mold growth. Our mold removal process is a comprehensive and carefully executed plan to eliminate mold and its associated health risks. Our mold removal process includes:

Assessment: We start with a thorough assessment to identify the extent of the mold problem, potential causes, and the best course of action.
Containment: To prevent the spread of mold spores, we set up containment barriers and negative air pressure systems and use specialized equipment.
Removal: Our certified technicians use advanced techniques and equipment to remove mold from affected areas safely.
Cleaning: We clean and disinfect surfaces to remove any remaining mold and prevent its return.
Restoration: We work on repairing and restoring any structural damage caused by mold.
Prevention: We identify and address the root causes of mold growth, such as moisture issues, to prevent future problems.

Don’t let mold ruin your life and home, whether you’re dealing with mold at home or in your place of business, our mold removal services are tailored to meet your specific needs.

Phone: (772) 224-2595

E-mail: wmircs@gmail.Com

Our Services Across Florida

We are committed to providing comprehensive and efficient services for homeowners and business owners in Florida. At Water Mold Inspect, you are our priority. If you have mold damage in your home, give us a call and we’ll go there.

Locations We Serve

We offer our services 24/7 in:

Comprehensive Mold Removal Services

We want to offer high-quality services and 100% effective solutions against mold damage. Our services include:

24/7 Emergency Response: Available anytime, including weekends and holidays.
Residential and Commercial Services: Tailored solutions for homes and businesses.
Preventive Measures: Strategies to prevent future mold growth and damage.

We offer a wide variety of additional services such as water damage, fire damage, disaster restoration, and plumbing leak detection, among many others. Contact us today if you need immediate solutions!

Protect Your Property with Our Expert Mold Assessments

Don’t let the mold cause you expensive repairs and over-costs. Contact Water Mold Inspect today and let us help you guarantee a 100% mold-free home or business. Don’t let the damage keep growing. Save money, health issues, and time in the long run with our mold assessment services!